18
EN
GL
IS
H
Air filter, inspection/cleaning
Never use the grass trimmer without an air filter. Clean or replace the filter if it is
damaged or dirty.
Cleaning the air filter:
1. Remove the air filter cover by pressing the snap locks on the sides to remove.
2. Remove the foam filter from the cover.
3. Wash the filter with soap and water. Do not use petrol!
4. Squeeze the filter and let it dry naturally.
5. Refit the filter, mount the cover and ensure that the snap locks are attached securely.
Carburettor settings
The carburettor has been factory adjusted for optimum power.
Spark plug
Spark plug: TORCH L8RTC, Champion CJ7Y, NGK BPMR7A.
Recommended spark plug gap: 0.635 mm.
Tightening torque: 12–15 Nm.
Sharpening the cutter blade (on the guard)
0,635 mm
1. Remove the cutter (E) from the trimmer
guard (F).
2. Hold the cutter in a vice. Sharpen the blade
using a flat file, sharpening in one direction
only and making sure to maintain
the original grinding angle.
