CNET CNIG904S User Manual Download

Page: 45 / 54

CNet Technology Inc

Broadband Router User Guide

Data

Enable

Enable DMZ
Feature

Use this to Enable or Disable the DMZ feature. The DMZ feature
should be disabled when not required.

LAN IP Address

Enter the IP Address of the PC on your LAN which will become the
"DMZ" PC.

If using DHCP, the LAN IP Address of a PC may change. To solve
this problem, you can use either of these methods:

•

Assign a fixed IP Address to the DMZ PC, ensuring that its IP
Address is NOT within the address range allocated by the DHCP
Server.

•

Reserve an IP Address for the DMZ PC in the DHCP Server,
using the

Access Control - PC

screen.

WAN IP Address

This is the IP Address Internet users must use to connect to the
"DMZ" PC.

This IP Address is allocated by your ISP. It is better if you are using a
fixed IP Address, so that it never changes. This will make it easier for
Internet users to connect to you. If using a Static IP Address, it is
entered on the "WAN" screen.

To Internet users, the IP Address of the DMZ com-
puter is the IP Address allocated by your ISP, as
shown by the "WAN IP Address" value.

Summary of Contents for CNIG904S























































Search results

Summary of Contents for CNIG904S

Reviews:

Related manuals for CNIG904S

Brands by name

Popular brands

CNET CNIG904S, User Manual

Search results

Summary of Contents for CNIG904S

Reviews:

Related manuals for CNIG904S

Brands by name

Popular brands