CNet Technology Inc
Broadband Router User Guide
36
•
To Enable a defined Application
- Select it from the drop-down list
- Click "Get Data"
- Check the
Enable
checkbox
- Click "Update"
•
To Disable a defined Application
- As above, but uncheck the
Enable
checkbox.
•
To Delete a defined Application
- Select it from the drop-down list,
- Click "Delete"
•
To Modify (Edit) a defined Application
-
Select it from the drop-down list,
- Click "Get Data"
- Make any desired changes
- Click "Update"
•
To Create a new Application
- Click "Clear Form"
- Enter the required data, as described below
- Click "Add"
•
To List all Applications
-
Click "List All"
Configuration Data (from Service Provider)
This data must be obtained from the service provider.
Name
Enter a descriptive name to identify this application entry.
Enable
Use this to Enable or Disable support for this application, as required.
Outgoing
Protocol
The protocol (TCP or UDP) used when you connect to the special applica-
tion service.
Port Range:
Start
The beginning of the range of port numbers used by the application server,
for data you send to it. If the application uses a single port number, enter it in
both the "Start" and "Finish" fields.
Port Range:
Finish
The end of the range of port numbers used by the application server, for data
you send.
Incoming
Protocol
The protocol (TCP or UDP) used when the application or service sends data
to you.
Port Range:
Start
The start of the range of port numbers used by the application server when
data is sent to you. If using only one port number, enter it in both the "Start"
and "Finish" fields.
Port Range:
Finish
The end of the range of port numbers used by the application server, when
data is sent to you.
