CNet Technology Inc
Configuration
11
LAN Screen
The LAN screen, like the example below, will be displayed when you first connect.
Figure 5: LAN Screen
LAN Configuration.
For most users, the default values for these fields should be satisfactory, and no changes will be
required.
If your LAN contains an existing Router or Routers, refer to
Chapter 6 - Routing
.
Data – LAN Screen
TCP/IP
IP Address
IP address for the Broadband Router. Use the default value of
192.168.0.1 unless the address is already in use or your LAN is using a
different IP address range. In the latter case, enter an unused IP Ad-
dress from within the range used by your LAN.
Network Mask
The default value 255.255.255.0 is standard for small (class "C")
networks. For other networks, use the Network Mask for the LAN
segment to which the Broadband Router is attached. i.e. the same value
as the PCs on that LAN segment.
