CNet Technology Inc
PC Configuration
25
Macintosh Configuration
You can access the Internet via the Broadband Router. The procedure is as follows.
1.
Open the TCP/IP Control Panel.
2.
Select
Ethernet
from the
Connect via
pop-up menu.
3.
Select
Using DHCP Server
from the
Configure
pop-up menu. The DHCP Client ID field
can be left blank.
4.
Close the TCP/IP panel, saving your settings.
Note:
If using manually assigned IP addresses instead of DHCP, the only change required is to
set the
Router Address
field to the Broadband Router's IP Address.