CNET CNIG904S User Manual Download

Page: 32 / 54

CNet Technology Inc

Routing

Routing Table Data

An entry in the routing table is required for each LAN segment on your Network, other than the
segment to which this device is attached. The data in the Routing Table is as follows.

Destination
IP Address

The network address of the remote LAN segment.
For standard class "C" LANs, the network address is the first 3 fields of
this

Destination IP Address

. The 4

(last) field can be left at 0.

Network Mask

The Network Mask used on the remote LAN segment. For class "C"
networks, the standard Network Mask is 255.255.255.0

Gateway
IP Address

The IP Address of the Router on the LAN segment to which this device is
attached. (NOT the router on the remote LAN segment.)

Interface

Select the appropriate interface - LAN (Internal LAN) or WAN (External
LAN or WAN) from the drop-down list.

Metric

The number of routers which must be traversed to reach the remote LAN
segment. The default value is 1.

Summary of Contents for CNIG904S























































Search results

Summary of Contents for CNIG904S

Reviews:

Related manuals for CNIG904S

Brands by name

Popular brands

CNET CNIG904S, User Manual

Search results

Summary of Contents for CNIG904S

Reviews:

Related manuals for CNIG904S

Brands by name

Popular brands