background image

 

35 

4.1.3.8  WAN Access Type -- PPTP 

 

This option is typically used for DSL services. Some DSL service providers supply a special DSL 

modem. This kind of modem only supports the PPTP tunnel to access the Internet, you should create a 

PPTP tunnel that carries a PPP session and terminates on the DSL model. Once the tunnel has been 

established, this kind of DSL modem will forward the PPP session to the ISP. As long as the PPP 

session is connected, all the local users will be able to share this PPP session to access to the Internet. 

Apply 3G or 3.5G transmission rate for the backup. Once Dynamic IP connection is disconnected, the 

system automatically connects Internet via 3.5G adapter. If 3.5G signal is not available, it starts to 

search downward for 3/2.75/2.5G signals until none existed.   

Setting up the interval time to auto detect whether the Internet connection is lost or not. If yes, the 

system immediately switches to 3.5G Internet connection and will disconnect automatically the original 

PPTP connection recovers. 

 

Summary of Contents for CBR-980





















































































































Reviews: