CNET CBR-980 User Manual Download Page 55

Page: 55 / 116

existed.

Clone MAC Address

Copy the MAC address from the device you had

registered to your ISP if your ISP asks for the specific

MAC Address.

Enable IGMP Proxy

The

Internet Group Management Protocol (IGMP)

a communications protocol used to manage the

membership of Internet Protocol multicast groups.

IGMP is used by IP hosts and adjacent multicast

routers to establish multicast group memberships. You

can choose to enable

IGMP Proxy

to provide service.

Enable Ping Access on WAN

Select

Enable Ping Access on WAN

, will make WAN

IP address response to any ping request from Internet

users. It is a common way for hacker to ping public

WAN IP address, to see is there any WAN IP address

available.

Enable Web Server Access on WAN

This option is to enable

Web Server Access

function

on WAN.

Apply Changes & Reset

Click on

Apply Changes

to save the setting data. Or

you may click on

Reset

to clear all the input data.

5.1.2

LAN Interface Setup

This page is used to configure the parameters for local area network that connects to the LAN ports of

your WLAN Broadband Router. Here you may change the setting for IP address, subnet mask, DHCP,

etc.

Summary of Contents for CBR-980





















































































































Search results

Summary of Contents for CBR-980

Reviews:

Related manuals for CBR-980

Brands by name

Popular brands

CNET CBR-980, User Manual

Search results

Summary of Contents for CBR-980

Reviews:

Related manuals for CBR-980

Brands by name

Popular brands