Need help? c-m-p.com/support 19
3. Place the lamp retainer over the quartz tube. Use the hex key included in the parts bag to attach the lamp retainer to the
UV reactor, using the lamp retainer screws and washers as shown in Figure 15. Make sure the lamp retainer flanges are
fully seated against the UV reactor.
4. Turn the circulation pump ON and check the quartz tube seal for leaks.
5. Turn the circulation pump OFF once you have confirmed that the quartz tube is not leaking.
CAUTION
Wear proper eye and skin protection for servicing glass components. If broken glass is trapped in the
pool system, do not operate the pool. Contact a service professional to have the glass removed.
Properly
Seated
Quartz
Tube
Improperly Seated
Quartz Tube
Figure 16: UV Quartz Tube Installation
4D. TECHNICAL CONTACT INFORMATION:
For technical assistance call: 1 (800) 733-9060 or visit our website: www.c-m-p.com/support
Be prepared with the following information:
• Name
• Address
• Model #
• Date Purchased
4. MAINTENANCE & SERVICE
OR VISIT C-M-P.COM/TECH
Scan for
Step-by-step
instructions
