10 Online Instructions: c-m-p.com/tech
Terminal
Block
Label for
Wiring
Instructions
Access for
1/2in Conduit
Figure 7: Terminal Block and Wiring Instructions
3A. POOL PREPARATION
To achieve optimal performance the pool must be as clean as possible to start with.
1. Backwash or clean filters one day before starting the AOP System.
2. Raise chlorine level to APSP recommended levels so the water has a sustained 1-3 ppm free chlorine level.
3. Test pool chemistry and adjust pH between 7.4 and 7.6. Adjust total alkalinity between 80 and 120 ppm.
4. Run pool filtration continuously for 24 hours prior to starting the AOP system.
3B. INITIAL SYSTEM START-UP
Upon completing all of the system connections and cleaning the pool as outlined in SECTIONS 2C through 3A, you are ready
to start the DEL AOP.
1. Check electrical connections at breaker box.
2. Turn on pool circulation system and the Smart Status LEDs will turn on automatically.
3. OPERATION
