2008-2011 IQ System Electric Vehicle Maintenance and Service Supplement
Page 12-1
12
SECTION 12 – IQ DISPLAY MODULE (IQDM)
SERIES 2 AND IQDM-P DIAGNOSTICS
ý
DANGER
• See General Warning, Section 10, Page 10-1.
ý
WARNING
• See General Warning, Section 10, Page 10-1.
NOTE:
For information specific to the IQDM-P programming features,
PLUGGING THE HANDSET INTO THE VEHICLE
1. Connect one end of the cable to the jack located on the bottom of the handset.
2. Connect the cable adaptor to the IQDM cable.
3. Find the IQDM jack on the vehicle.
4. Remove the dust cap from the IQDM jack.
5. Align the keyed portion of the plug with the IQDM jack and connect the plug to the jack.
Figure 12-1 IQDM Jack Under Seat in Extended
Position (DS Villager 4)
Figure 12-2 IQDM Jack Under Instrument Panel
(Turf 1/Carryall 1)
Note: Seat shown in illustration
may not match all models.