![background image](http://html1.mh-extra.com/html/club-car/carryall-1/carryall-1_maintenance-and-service-manual-supplement_2626702158.webp)
TRANSAXLE (TYPE G)
Transaxle Disassembly, Inspection, and Assembly
Page 17-8
2008-2011 IQ System Electric Vehicle Maintenance and Service Supplement
17
Transaxle Disassembly and Inspection, Continued:
7. Press the bearing (18) off the intermediate gear assembly
8. Disassemble the differential gear case:
8.1. Remove the hex bolts (33) and the ring gear (32) from the differential case
8.2. Remove the ring gear.
8.3. Separate the differential gear case housing. If necessary, install two of the hex bolts (removed pre-
viously in step 8.1) into the differential gear unit and, while holding the unit slightly above the work
area, lightly tap the bolt heads
. Remove the two bolts.
8.4. Remove the differential pin (31) by pushing pin through differential gear case from one side
.
See also Figure 17-15, Page 17-9.
8.5. Remove the idler gears and thrust plates (1 and 2)
Figure 17-13 Intermediate Gear Assembly
Figure 17-14 Separate Housing
ARBOR
PRESS RAM