Club Car Carryall 1, Maintenance And Service Manual Supplement, Page: 138 / 176

MOTOR (MODELS EJ4-4001 AND EJ8-4001A) Motor
Page 16b-4 2008-2011 IQ System Electric Vehicle Maintenance and Service Supplement
16B
8. To gain easier access to the motor, lower the transaxle as low as it will go. If more room is needed,
remove the jack from beneath the transaxle and allow the springs to rest on the floor (Figure 16b-3,
Page 16b-4) .
9. Remove the bolts that mount the motor to the transaxle (Figure 16b-24, Page 16b-16). See following
CAUTION.
ý
CAUTION
• Do not position fingers under motor when sliding motor off of the input shaft in step 9.
Fingers may get pinched when motor disengages.
10. Carefully slide the motor away from the transaxle until the motor spline disengages the input shaft and
remove the motor from the vehicle.
Figure 16b-3 Lower Axle
Figure 16b-4 Speed Sensor Magnet Figure 16b-5 End Cap