CLIPIC MECHA, Owner'S Handbook Manual

Page: 94 / 154

94
REAR BRAKE PEDAL LEVEL
Adjustment:
1.
Place the motorcycle on its side stand.
2. The stopper bolt (1) is provided to allow adjustment of
the pedal height.
To adjust the pedal height, loosen the lock nut (2) and turn
the stopper bolt. Tighten the lock nut.
3. Measure the distance the rear brake pedal (3) moves befo-
re the brake starts to take hold.
Free play should be:
20-30 mm (0.8-1.2in)
4. If adjustment is necessary, turn the rear brake adjusting
nut (4).
Make sure the cut-out on the adjusting nut is seated on the
brake arm pin (5) after making final free play adjustment.
If proper adjustment cannot be obtained by this method see
your Honda dealer.
5. Apply the brake several times and check for free wheel ro-
tation after the brake pedal is released.
Major components
1. Stopper bolt
2. Lock nut
3. Rear brake pedal
4. Adjusting nut
5. Brake arm pin
A. Decrease free play
B. Increase free play