CLIPIC MECHA, Owner'S Handbook Manual

Page: 110 / 154

110
Starting Procedure
To restart a warm engine, follow the procedure for „High Air
Temperature‰.
Normal Air Temperature
10-35 (50-95F)
1. Pull the choke level (1) up all the way to Fully OFF (A).
2. Keep the throttle fully closed.
3. Operate the kickstarter to start the engine.
Starting from the top of the stroke, kick through to thr bo-
ttom with a rapid, continuous motion.
Do not operate the throttle.
NOTICE
Allowing the kickstarter to snap back freely against the pedal stop can damage the
engine case.
4. Immediately after the engine starts, push the choke level (1) down to the Detent
Position (B).
5. Warm up the engine by opening and closing the throttle slightly.
About a quarter minute after the engine starts, push the choke level (1) down all the
way to Fully
6. If idling is unstable, open the throttle slightly.
Operation
1. Choke level
A. Fully OFF
B. Detent position
C. Fully ON