climecon.fi
18
Lämmittäjänkatu 4 A, 00880 Helsinki, FINLAND · Tel. +358 (0)20 198 6600
© Climecon
1.
Install the hood’s outermost grease
separators first and the grease separa-
tor second from the left only as the last.
Remember to also install the grease trays
on the bottom of the exhaust air chamber.
2.
Move the left grease separator to the
right.
3.
Lock the SlideSafe safety lock by first lift-
ing the hand knobs to their upper position
and then retightening them.
NOTE! The CleanMaster® system will not
start if the SlideSafe safety lock has not
been locked properly.
14. Installing the grease separators and locking
the SlideSafe safety lock
SWITCH THE SYSTEM OFF BEFORE PERFORMING
ANY MAINTENANCE ACTIONS
OFF
1
2
3