CLiC-iT RiDER, Instruction And Maintenance Manual, Page: 7 / 39

#
DIN 933 Screw
M8x35 (min.)
A2
DIN 933 Self-Locking nut
M8
8.8
x4
x4
The location where the IMN&CLiC-iT
CBS elements will be installed shall
meet the following requirements:
Ÿ
Must have sufficient mechanical
strength to install the system.
Ÿ
A vertical surface is required to install
Anchor Wedge .
Ÿ
This vetical surface must have the
necessary holes to screw
Anchor
Wedge.
The connection of Anchor W edge on a vertical surface is carried out
according to the following scheme:
Before the purchase of MN&CLiC-iT CBS items it´s necessary to know the park
characteristics and design the structural components necessary for the installation of
the system.
Holes dimensions to install
Anchor Wedge
Example for structural parks
Anchor Wedge + Connection Part
Example of
connection part
design for
structural parks
Anchor Wedge
holes
dimensions
Required tools:
Spanner - ISO/DIN13mm
68
30
9
30
8,5
68
*For Le-Clou system.
Please contact for more information.
3.3 Anchor Wedge Installation
*