CLiC-iT RiDER, Instruction And Maintenance Manual, Page: 19 / 39

#
The point where the cable enters the Anchor must be at least 5
cm long in straight extension with respect to the direction of the
Anchor, to prevent the MCD from hitting the Anchor. These
two points must be marked in order to carry out inspections
and check that the cable does not slide.
It must be ensured that the cable curve is separated from the
structural element (pole or other game elements), at least 15
cm, to avoid possible MCD collisions.
At the anchorage points where the curve is resolved using
Articulated Arms, it must be ensured that all connecting
elements, including structural elements, support a minimum
load of 20kN.
The curve described by the
cable must be 40-45 cm
long, measured from the
outlet of the Anchor to the
entry into the next Anchor. These points must be dimensionally
checked according to the annual
maintenance protocol present in
this manual. Remember to perform
a visual inspection prior to the start
of the activity.
45cm
5cm
15cm
5
Safety line cable installation