CLiC-iT RiDER, Instruction And Maintenance Manual, Page: 14 / 39

#
Self-Locking nuts
DIN 985 M8
Self-Locking nuts
DIN 985 M8
x2
x1
x1
x2
x1
6.2
Inverter
8
8.2 Inverter and Vertical Positioner Assembly
Screw
DIN 7380 M8x20
Screw
DIN 7380 M8x20
Flat Washer
DIN 125 M8
Required tools:
Spanner - ISO/DIN13mm
Hex Key - 6mm (7/32'')
Reference: INP-V1
This element inverts the
positioning of the anchorage and
allows to adjust the inclination of
this to adapt to a certain
trajectory of IMN & CLiC-iT CBS.
Connection for
Vertical Positioner
C o n n e c t i o n t o
structural surface
Connection for
Non Return
8.1 Description
The cable crimping must be done with a crimping tool capable of exerting a force of
130 KN. The crimp die used must be of type K18 according to DIN 48083.
A total of 8 crimpings
must be made on the
crimp sleeve.
At times during installation there may be a need to connect two ends of the safety line
cable.
9.1 Description & instructions
Reference: CC-V1
4 crimps must be made on
each cable connection.
=
=
≠
≠
Hexagonal crimping die K18
Manual hydraulic crimping tool
Ex:CEMBRE Model 1350-C
4 crimps 4 crimps
3 crimps 5 crimps
3 crimps 3 crimps
Not fluggy plugged. Risk of death
Not equal distance. Risk of death
.
Cable connector
9
=