CLiC-iT RiDER, Instruction And Maintenance Manual, Page: 21 / 39

#
Store the MCDs in a cool, dry place and free of chemical agents to
avoid deterioration. Avoid unnecessary exposure to UV light.
During the maintenance and control of safety line elements, special
attention should be paid to the points where direction changes.
Check the correct orientation of the mobile devices and the
appropriate conditions of the CLiC-iT Rider Pulley.
IMN & CLiC-iT Continuous Belay System components are intended for
activities involving a risk to safety and health. Both the installation and the
use of this product must respect the specifications provided by the
manufacturer in this manual. In addition, the user must respect the
preliminary usage indications of monitors and instructors. In short, both
the user and the installer are responsible for their decisions, actions and
finally for their security.
DEHONDT SARL & IMN are not liable for direct, indirect, accidental or
any other consequences occurring or due to the use of its products.
DEHONDT SARL & IMN waive any responsibility if the storage, transport,
use, maintenance and cleaning instructions are not met.
Before performing an installation make sure:
Before the rst use make sure:
Ÿ
Accept the intrinsic risks of the installation and its use.
Ÿ
Read and understand all the instructions in this manual.
Ÿ
Receive all the specific training for the installation and use of all the
elements of the lifeline.
Ÿ
To know and be accustomed to the use of these equipments and to
acquire all the knowledge on the performances and limitations of these.
Ÿ
Check the correct condition of the constituent products for installation.
Ÿ
Have the necessary tools and material for installation.
Ÿ
Ensure the viability of the medium for the installation of the system.
Ÿ
The manufacturer has previously checked the technical and
safety parameters to guarantee the installation quality to the
customer.
Ÿ
To have the personal protective equipment (PPE) necessary
for the development of the activity. And make sure these are
in good condition.
Ÿ
Have read the operating and safety instructions in this
manual.
Ÿ
Have previously received the manufacturer’s training and
initial breafing.
Failure to comply with these instructions could cause serious or fatal physical harm.
If this product is resold as new in another country, the present notice should be
translated in the language of the country of destination.
This product should be used by users trained for the use and recognition
of risks related to the activity. And under visual control of competent and
responsible personnel.
C. RESPONSABILITY & GENERAL RECOMENDATIONS