CLiC-iT RiDER, Instruction And Maintenance Manual, Page: 3 / 39

#
Structural anchorages compatible with the CLiC-iT Rider Pulley must meet the requirements of the UNE
EN 795:2012 standard to ensure user safety. Moreover the instructions of the lifeline must comply with
the En15767 standard.
Below are the dimensional requirements that an anchorage must meet to be considered compatible with
the CLiC-iT Rider Pulley:
Ÿ
The anchorage must be inclined 35º with the vertical axis to ensure correct movement of the MCD,
correct stability and avoid collisions in the system.
Ø20mm
max. thickness:
5mm
min. neck length:
20mm
80mm min.
7
0
m
m
m
in
.
1.1
1
CLiC-iT Rider components compatibility
Clic-It Rider Pulley
1
2
3
4
1
2 4
3
Pin Lock Carabiner
Anchor
Cable
IMN & Clic-it CBS system is exclusively compatible with the Clit-it Rider Pulley.
Do not use other type of pulleys on this safety line. In order to ensure a safe installation use only components supplied or recommended by CLiC-iT or IMN.
Please refer to the Clic-it Rider pulley manual, pinlock manual and lanyard manual for complete instructions for use.
SAFETY LINE CABLE FOR CLiC-iT Rider Pulley:
Type: 6x19 + IWRC (steel core compacted) Nominal diameter: 12 mm
Core: steel
Surface Treatment: hot-deep galvanized
Real diameter: ø = 12mm
Resistance: 127 kN
Cable compatibility
A. COMPONENTS
1