CLiC-iT RiDER, Instruction And Maintenance Manual, Page: 15 / 39

#
Reference: RS-V1
Misuse of the product:
The cable crimping must be done with a
crimping tool capable of exerting a force of
130 KN. The crimp die used must be of type
K18 according to DIN 48083.
Inclination of the product with respect to the
vertical axis:
Hexagonal crimping die K18
Manual hydraulic crimping tool
Ex:CEMBRE Model 1350-C
How to install it?
Primary route procedure
It is not necessary to handle the MCD
if the product has been installed at 35º
respect to the vertical axis.
Secondary route procedure
Wrong
turning direction
1
4
5
º
Correct
turning direction
Where to install it?
Forbidden to install this
component in ziplines and
rope course games
Only install on a
stable platform
Route Swapper is a device designed to alternate between safety line routes in an high rope
course. It should be installed at a comfortable height where the user will have to manipulate
CLiC-iT Rider Pulley.
It works by turning the MCD to orient it towards the alternative route or by maintaining original
orientation to continue on the route.
35º
1
4
5
º
5.5
Route swapper
10
4 Crimps must be made on each cable connection