Clevo W950JU User Manual Download

Page: 210 / 222

Video Driver Controls

C - 16 Attaching Other Displays

Attaching Other Displays

To Clone Displays:

Attach your external display to the HDMI-Out port/external monitor port, and turn it on.

Go to the

Intel(R) HD Graphics Control Panel

control panel and click

Display

Multiple Displays

(sub-menu).

Click

Clone

from the

Select Display Mode

menu.

Click

Apply

, and

to confirm the settings change.

Select the displays from the

Select One or More Active Displays

menu.



Multiple Display

At least one other dis-
play must be attached in
order to view

Multiple

Display

selection op-

tions.

Figure C - 15

Display > Multiple

Displays (Clone)

Summary of Contents for W950JU































































































































































































































Search results

Summary of Contents for W950JU

Reviews:

Related manuals for W950JU

Brands by name

Popular brands

Clevo W950JU, User Manual

Search results

Summary of Contents for W950JU

Reviews:

Related manuals for W950JU

Brands by name

Popular brands