Clevo W950JU User Manual Download Page 161

Page: 161 / 222

Modules & Options

3G/4G Module 6 - 25

3G/4G Module USIM Card Installation for Model B Computers

Follow the instructions below to install the USIM card (which will be supplied by
your service provider).

Turn the computer

off

, and turn it over.

Slide the latch

in the direction of the arrow.

Slide the latch

in the direction of the arrow, and hold it in place.

Slide the battery out in the direction of the arrow

Insert the USIM card

as illustrated below until it clicks fully into position, and

replace the battery.



Power Safety

Warning

Before you undertake any
installation procedures,
make sure that you have
turned off the power, and
disconnected all peripher-
als and cables (including
telephone lines).

USIM Card Orientation

Note that the USIM card’s
readable side (with the
gold-colored contacts)
should face downwards as
illustrated.

Figure 6 - 19

Battery Removal &

USIM Card Insertion

Model B

1
2

Summary of Contents for W950JU































































































































































































































Search results

Summary of Contents for W950JU

Reviews:

Related manuals for W950JU

Brands by name

Popular brands

Clevo W950JU, User Manual

Search results

Summary of Contents for W950JU

Reviews:

Related manuals for W950JU

Brands by name

Popular brands