Clevo W950JU, User Manual

Page: 160 / 222

Modules & Options
6 - 24 3G/4G Module
6
3G/4G Module
If you have included an optional UMTS/HSPA+ based 3G Module (Universal Mo-
bile Telecommunications System or High Speed Packet Access) module or LTE
(Long Term Evolution) 4G module (see “Communication” on page D - 3 for spec-
ification details) in your purchase option, you do not require a driver/application
installation for Windows . Follow the instructions overleaf to install the USIM card
(which will be supplied by your service provider) for Model B computers (installing
the USIM card for Model A computers will require assistance from your distributor/
supplier - see page 6 - 26 ), and then use the Charms Bar Wireless icon to access
the 3G/4G network in the same manner as the WLAN.

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission
devices aboard aircraft
is usually prohibited.
Make sure the
WLAN &
Bluetooth module(s)
are OFF
(or the system
is in Airplane Mode ) if
you are using the com-
puter aboard aircraft
(see
Table 1 - 3, on
page 1 - 12 ).

Important Notice
If your purchase option includes both Wireless LAN and 3G/4G modules, then the appro-
priate antennas will be installed. Note that In order to comply with FCC RF exposure com-
pliance requirements, the antenna must not be co-located or operate in conjunction with
any other antenna or transmitter.
Important Notice - 3G/4G & Bluetooth/Wireless LAN Modules
In order to comply with FCC regulations you should NOT operate the 3G/4G module and
the Bluetooth/Wireless LAN modules at the same time as this may disrupt radio frequency,
and cause interference. When the 3G/4G module is powered on, make sure that the Blue-
tooth/Wireless LAN modules are powered off.