Clevo W950JU User Manual Download

Page: 102 / 222

Power Management

3 - 18 Battery Information

Conserving Battery Power

• Use a

power plan

that conserves power (e.g

Power saver

), however note that

this may have an affect on computer performance.

• Lower the brightness level of the LCD display. The system will decrease LCD

brightness slightly to save power when it is not powered by the AC/DC adapter.

• Reduce the amount of time before the display is turned off.

• Close wireless, Bluetooth, modem or communication applications when they are

not being used.

• Disconnect/remove any unnecessary external devices e.g. USB devices,

ExpressCards etc.



Windows Mobility

Center

The

Windows Mobility

Center

control panel

provides an easy point
of access for information
on battery status, power
plans used and wireless
device status etc.

Figure 3 - 12

Windows Mobility

Center

(Control Panel)

Summary of Contents for W950JU































































































































































































































Search results

Summary of Contents for W950JU

Reviews:

Related manuals for W950JU

Brands by name

Popular brands

Clevo W950JU, User Manual

Search results

Summary of Contents for W950JU

Reviews:

Related manuals for W950JU

Brands by name

Popular brands