Cleco 17BP B, Instruction Manual

Page: 24 / 62

24 P1890E/EN 2010-08
91c_LCD en bedingt.fm, 10.09.2010
LCD display
7
7.3 Operating menu
7.3.1 General
The operating menu on the tool is divided into a main menu and submenus. You can navigate through the
menus using the two function keys below the LCD display. In the following description, <F1> is used for the
left function key and <F2> is used for the right function key. The menu is activated by pressing the right
function key, <F2>. The menus can be disabled by configuring appropriate parameter in the controller.
Basic functions:
➔
<F2>: Activate main menu.
➔
<F1>: Go to previous menu item.
➔
<F2>: Go to next menu item.
➔
Press <F1> longer than 2 seconds
to go to the next higher menu level. If the main menu is activated, the system goes into production
mode.
➔
Press the start button or <F2> longer than 2 seconds
to activated the highlighted item or execute the highlighted action. Actions that start the tool can be car-
ried out only by pressing the start button.
➔
If the menu is enabled, no rundowns are possible.
➔
Each submenu has an entry for Back .
Enables the main menu.
Back