Cleco 17BP B, Instruction Manual

Page: 15 / 62

91b_1_5 en bedingt.fm, 10.09.2010
P1890E/EN 2010-08 15
Product description
3
3.2.7 Identification – set torque
To identify the set torque on the 17BP, glue the corresponding marking foil to the right and the left of the
LCD display.
3.2.8 LED lighting
LED lighting make it possible to quickly find the screw point.
3 different activation methods are possible. Define the method by programming
the controller correspondingly:
•
Activation by pressing the start button halfway down (3.2.3 Start button, page 14).
• Time-controlled beginning at start
• You also have the option of disabling it.
The lighting distance is up to 19.7" (500 mm).
3.2.9 Power supply
See Instruction manual Accupack / Instruction manual Power Module PM48.
3.2.10 LCD display
See 7 LCD display, page 21
NOTE
After the tool is switched on, it can take up to 35 seconds until the communication via WLAN is active.
Order No. 935078