18
P1890E/EN 2010-08
91b_1_5 en bedingt.fm, 10.09.2010
Before initial operation
5
5
Before initial operation
The 17BP has been configured by Cooper Power Tools & GmbH & Co. OHG. A setting for your specific
screw joint needs must only be made with the controller or a computer by a qualified person. For more infor-
mation, refer to the controller programming manual.
5.1
Setting up tool holder
➔
Mount the tool holder on a stable base.
For tool holder with IrDA interface port:
➔
Select the location in such a way that no outside light shines onto the tool holder.
This can inhibit data transmission.
➔
Lay the connection cable in such a way that there is no danger that persons can trip.
5.2
Ambient conditions
5.3
Charging the battery
Battery is only partly charged when delivered.
➔
Charge fully before first use. See Instruction manual accupack.
5.4
Changing the screw inserts
Abb. 5-1
Screw bits (GETA / APEX recommended):
Connection in accordance with DIN 3126, form E 6,3 (¼" shank).
Ambient temperature
0 °C (32 °F) to m40° C (+104° F)
Humidity
0 to 80 %, not with dew
Working height
up to 1000 m above sea level
1.
2.
1.
2.
Insertion
Removal
Summary of Contents for 17BP B
Page 4: ...4 P1890E EN 2010 08 90a_ Deckblatt en fm 10 09 2010...
Page 20: ...20 P1890E EN 2010 08 91b_1_5 en bedingt fm 10 09 2010 First Operation 6...
Page 48: ...48 P1890E EN 2010 08 91e_Trouble shooting en bedingt fm 10 09 2010 Troubleshooting 9...
Page 54: ...54 P1890E EN 2010 08 90e_Ersatzteile en fm 10 09 2010 Spare parts 10...