Cleco 17BP B, Instruction Manual

Page: 22 / 62

22 P1890E/EN 2010-08
91c_LCD en bedingt.fm, 10.09.2010
LCD display
7
7.2 Status display
The status display is divided into the "Standard" and "Linking" modes. "Standard" is selected if "Linking" is
not enabled at the control system
➔
See
Advanced Application Builder\Linking
). The application is selected at the <Run Screen>
or via the App. selection inputs.
No other status messages take priority.
The tool is ready.
Number of remaining rundowns that can still be carried out until the rundown data memory
is full and the rundown data have to be transmitted to the control.
Emergency strategy active. Indicates that the emergency strategy is currently enabled and
thus that no connection to the control must exist.
A maximum of 512 rundowns can be carried out.
All fastening sequences have been completed.
➔
Synchronize the tool with the control once again.
No fastening sequences have been initialized.
➔
Synchronize the tool with the control once again.
No fastening sequence parameters have been set.
➔
Check the Application and Tightening group selected on the control to determine
whether the tool settings and process programming have been carried out.
Application locked.
➔
Synchronize the tool with the control once again.
Reject Release active.
The Reject Release was programmed in the control.
➔
See
Advanced Application Builder\Reject Release
.
➔
Depending on the programming, unlock the tool via the external input NOK release
or Release on Backoff. For unlocking via the external input NOK release , set the
external input and synchronize it with the control.
Ready
Remain
512
Emerge
Strate
Job
comple
Sync
No
Job
Sync
Parame
not
set
App
locked
Sync
Reject
Releas
Sync