CleaverBrooks ProFire Q Series, Installation Operation & Maintenance

Page: 46 / 88

Operation
3-18
750-437
Q Series Full Modulation
Press ( enter) to perform the backup and the “1” shifts to the right edge and stops flashing:
{ 1}
Wait approximately 8 seconds and display changes to a non-flashing “0”.
{ 0}
Backup is complete.
Press (ESC / - & +) : {bAC_uP}
Press (ESC / - & +) : {050.00: 0} “050” blinking
Press (ESC / - & +) : {000: Int } “000” flashing
Press (+) until control displays: {400: Set} “400” flashing
Commissioning and backup are complete.
J) Logout/exit Parameter Settings.
With the display showing: {400: Set} “400” flashing
Press and hold (ESC / - & +) until control displays:
{CLr CodE}
Password-parameter access is now off. The running burner returns to automatic operation and displays:
{oP XX.X} where XX.X is the firing rate value.
When the burner cycle is complete, the burner returns to standby and displays:
{OFF}