CleaverBrooks ProFire Q Series, Installation Operation & Maintenance

Page: 75 / 88

750-437
Q Series Full Modulation
6-17
Troubleshooting
121 Any # Internal error EEPROM access
Reset the fault and check to make sure the last parameter that was viewed / changed is set
properly. Restore the parameter set if possible. If the fault occurs continuously, replace the
LMV3.
122 Any # Internal error EEPROM access
123 Any # Internal error EEPROM access
124 Any # Internal error EEPROM access
125 Any # Internal error EEPROM read access
Reset the fault and check to make sure the last parameter that was viewed / changed is set
properly. If the fault occurs continuously, replace the LMV3.
126 Any # Internal error EEPROM write access
127 Any # Internal error EEPROM access
Reset the fault and check to make sure the last parameter that was viewed / changed is set
properly. Restore the parameter set if possible. If the fault occurs continuously, replace the
LMV3.
128 0
Internal error EEPROM access -
synchronization during initialization
If the fault occurs continuously, replace the LMV3.
129 Any #
Internal error EEPROM access - command
synchronization
Reset the fault and check to make sure the last parameter that was viewed / changed is set
properly. If the fault occurs continuously, replace the LMV3.
130 Any # Internal error EEPROM access - timeout
131 Any #
Internal error EEPROM access - page on
abort
132 Any #
Internal error EEPROM register
initialization
If the fault occurs continuously, replace the LMV3.
133 Any #
Internal error EEPROM access - request
synchronization
Reset the fault and check to make sure the last parameter that was viewed / changed is set
properly. If the fault occurs continuously, replace the LMV3.
134 Any #
Internal error EEPROM access - request
synchronization
135 Any #
Internal error EEPROM access - request
synchronization
136
Any # Restore
No fault: A restore was started via parameter 050. New LMV3s require a reset after a
restore. Reset the LMV3.
1
Restore started - for further diagnostic
codes, refer to error code 137
Error
Code Diag. Code Description
Corrective Action
Note: Diagnostic codes are additive. If a diagnostic code appears that is not on this list, it is a combination of multiple diagnostic codes.