CleaverBrooks ProFire Q Series, Installation Operation & Maintenance

Page: 39 / 88

750-437
Q Series Full Modulation
3-11
Operation
3.6.1 — Password Entry / Login
With power on (panel's white indicator is illuminated) and Burner switch in the OFF position, the control
displays:
{OFF}
Reset any errors by holding the (reset) button for 1 to 3 seconds. To access LMV3 parameters, you'll need to
enter the password “YYYYY”.
Press and hold (VSD / F & A) until the control displays:
{CodE}
The display then changes and appears with a flashing bar at the bottom left and is ready to accept password
entry:
The (-) and (+) buttons will scroll the AZL through its character set. To enter the first “Y” of the password, press
(-) once; a blinking Y should appear:
FIGURE 3-4.
AZL Display