CLEARSPAN
™
POLY BUILDINGS
26
Revision date: 05.20.20
ASSEMBLE AND ATTACH ROLL-UP CONDUIT
(continued)
5. Using the diagrams below, assemble and attach the
universal joint, extension pipe, and spin handle.
6. Move to the other end of the curtain and trim the
conduit to the desired length.
7. Repeat steps for all remaining roll-up curtain conduits.
8. After installing all conduits, roll each curtain to the top
and temporarily secure the curtain to the face board
using strap or rope. This step prevents the curtains
from damage and protects individuals from injury in the
event that the winds increase during the installation of
the main cover.
The straps for the main cover also serve as the anti-
billow straps for the roll-up curtain or curtains. These
are installed with the main cover.
To prevent damage and possible injury, do not
continue without first securing the roll-up curtain
panels. See the diagram below.
Attach the universal joint to the pipe
in the pocket using a Tek screw to
secure the connection.
Using the extension pipe, secure
one end of the extension pipe
to the remaining end of the
universal joint using a Tek screw.
Add the spin handle to the
extension pole and secure the
connection with a Tek screw.
103396
103395
12
