background image

Echelon™ Cycle Shelter

GROUND FIXING & END PANEL INSTALLATION INSTRUCTIONS

GROUND FIXING KIT CONTENTS

OPTIONAL END PANEL FIXING KIT CONTENTS:

ITEM 1 - Self Tapping Anchor Bolt (M10 x 100mm) 

x12 

ITEM 2 - Washer (M12 x 23mm) 

                                    x12

TOOLS/EQUIPMENT REQUIRED:

- Drill + 010mm masonry drill bit.
- 17mm Socket wrench.
- Spiral brush + Air blower (Optional)

- 4mm Allen Key (Supplied)

1 Panel Kit

2 Panel Kit

Please also refer to the ‘Manual Handling Operations Regulations 1992’ during the handling of the 

product and materials used for installation. Glasdon recommends that a full Health and Safety 

analysis is carried out prior to installation.

IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE

1 of 4

DIAGRAM NOT TO SCALE

ITEM 3 - 3mm Polycarbonate End Panel 

      x 1    

ITEM 4 - Socket Button head screw (M6 x 20mm)    x 39 
ITEM 5 - Spring Washer M6                         

      x 39

ITEM 6 - Penny Washer (M6 x 25mm)   

      x 39

ITEM 7 - Spacer (M6 x 10 x 3mm)                                         x 39

x 2
x 78
x 78
x 78
x 78

1

4

5

2

3

6

7

Summary of Contents for Echelon

Page 1: ...Kit Please also refer to the Manual Handling Operations Regulations 1992 during the handling of the product and materials used for installation Glasdon recommends that a full Health and Safety analysis is carried out prior to installation IMPORTANT NOTE ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE 1 of 4 DIAGRAM NOT TO SCALE ITEM 3 3mm Polycarbonate End Panel x 1 ITEM 4 ...

Page 2: ...ground fixing and washer into the drilled hole and tighten with Socket and Wrench Set For optimum fixing performance the following procedure is recommended INSTALLATION GROUND FIXING INSTRUCTIONS Concrete Surface Mount Adjustable Feet 80mm 80mm 4000mm 4115mm 2285mm A 200mm Detail View A Minimum Conctrete Depth Minimum distance afrom any edge of the concrete In cases of uneven ground use the adjust...

Page 3: ...e holes with the fixing points in the frame Remove the remaining protective film from the panel Insert the remaining fixings into each of the holes and tighten using the allen key to secure the panel Repeat around the perimeter ensuring all fixings are secure NOTE Take care do not overtighten If using a torque wrench or drill to tighten a force of no more than 10Nm is required Insert the assembled...

Page 4: ...om GLASDON GLASDON cannot be held responsible for claims arising from incorrect installation unauthorised modifications or misuse of the product Copyright 06 2018 Glasdon UK Ltd reserve the right to alter specifications without prior notice 4 of 4 IMPORTANT NOTE PLEASE ENSURE THAT ALL RELEVANT PERSONNEL READ THE POINTS LISTED WITHIN THIS LEAFLET AND THAT A COPY IS GIVEN TO STAFF INVOLVED WITH THE ...

Reviews: