CLEARSPAN
™
POLY BUILDINGS
4
Revision date: 05.20.20
Required Customer-Supplied Lumber List
108440
100'
Item Description
Location
Quantity
2" x 6" x 15'-3" Tongue and Groove
End Walls
24
2" x 6" x 4'-0" Tongue and Groove
End Walls
24
2" x 8" x 17'-3"
Door Header
2
2" x 8" x 16'-3"
Door Header
2
2" x 6" x 14'-9"
Top of End Walls
2
2" x 6" x 10'-0" Tongue and Groove
Side Walls
120
2" x 6" x 10'-0"
Top & Middle Side Walls
20
1" x 4" x 10'-0"
Top of Side Wall
10
6" x 6" x 14'-0" Wood Post
Frame
34
6" x 6" x 29'-9" Wood Post
Door Frame
2
6" x 6" x 22'-10" Wood Post
Door Frame
2
6" x 6" x 9'-6" Wood Post
Horizontal Header
10
SPECIAL NOTE: Customer-Supplied Lumber
The lumber needed for this building is
not included
with the
shipment and must be supplied by the customer. Treated
lumber is recommended. Consult a lumber specialist for
additional suggestions and information before purchasing
lumber for this building.
The individuals assembling this structure are responsible
for designing and furnishing all lumber needed during the
assembly process. For safety reasons, those who are
not familiar with recognized construction methods and
techniques
must seek the help of a qualified contractor.
Refer to the Quick Start section located in the back of these
instructions for further information.
Below is a list of the recommended lumber, indicating
lengths and quantities needed for this building in its current
design. Customer- or contractor-generated changes may
require the additional purchase of fasteners and lumber not
indicated in the table that follows.
Additional parts not listed above may be needed. Consult the Quick Start diagrams for details and component
positions. Table shows lengths needed to finish a specific part of the building. Depending on availability, longer
lengths may be purchased and cut on site. Consult with a lumber specialist for additional information.
Fasteners to secure the above materials are supplied by the customer. Fasteners included with the Beef Master™
system are used to assemble the building, attach building to the customer-supplied wood frame, and to secure the
end wall frame to the end rafters. Additional fasteners are included to mount ratchets and to assemble the awning.
All other required fasteners are supplied by the customer and depend on the specifics of the construction.
ATTENTION:
Changes made by the contractor/owner
specific to the desired results may require a materials
list that differs from what is shown below. All fasteners
needed to construct the wood components of the Beef
Master™ system are supplied by the customer unless
otherwise note.
Consult the Quick Start Guide at the back of this manual
for a breakdown of the fasteners included with the Beef
Master™ system and for diagrams showing where these
are used.
