Front Hopper
[9]
Once the drill has been fully attached to the tractor, the RDS control box mounted in the cab
and front hopper mounted on the tractors front linkage, then the delivery system should be
installed. This compromises of:
1.
7m x 110mm OD flexible air hose,
2.
4m x 110mm OD plastic pipe and
3.
4 x Stainless Steel jubilee clips
The fitting of this equipment is the responsibility of the customer; representatives of Claydon
Yield-O-Meter are not permitted to carry out work on customers tractors. An indication of how
the equipment may be fitted can be seen in Figure 4.
Figure 4: Installation of delivery system
Once the Front Hopper, delivery system and power cable have been attached to the tractor,
a connection is required to be made between drill and hopper. This is completed by
connecting the supplied extension cable and routing it accordingly down the side of the
tractor. The required connections can be seen in Figure 5.
Cables to connect
Figure 5 – Electric cable connections
Flexible hose
Plastic pipe
Flexible hose
Mounting bracket installed
by customer
Drill plug (female fitting)
One end of extension
cable
Front Hopper plug
(female fitting)
Other end of extension
cable
Extension cable (male fittings)
