Front Hopper
[16]
1.
Setup Menu
2.
Navigate to INFO Screen
(currently displayed)
3.
Navigate to RATE Screen
4.
Navigate to MAIN Screen
5.
Number Key Pad
6.
Power On/Off
7.
Select Part Total/ Normal Total
(Part Total currently in view)
8.
Select Grand Total Screen
9.
Not in use in this function
10.
Reset Total (only applicable
to part total and Normal
Total)
11.
Back Space Key
12.
Enter Key
Figure 12 – Info screen controls
9.5 Setup Menu
On pressing the Setup Menu key the screen displayed in Figure 13 will be shown, shortcut
keys are now present along the bottom of the screen; the corresponding buttons are
positioned directly under each option.
1.
Calibration check
button
2.
Shortcut to manual
calibration screen
3.
Tramline Setup
4.
Alarms Setup
5.
Data Logging and
Variable Rate
functions
Figure 13 – Shortcut keys within setup menu
The Calibration check option will be discussed in greater detail after the calibration
procedure has been described. The Tramline and Alarms Setup menus will be explained in
the following sections, for further information on the remaining Setup screens please consult
the RDS manual.
