Front Hopper
[18]
9.5.2 Alarms Setup
In order to view the fan speed alarm limits and the status of the hopper level sensors, the
alarms setup menu can be accessed by pressing the alarms shortcut key (Figure 16).
Figure 16 – Alarms shortcut key
Figure 17 displays the recommended fan speed threshold settings and whether the fertiliser
low level sensor is activated. If the fan speed drops or exceeds the pre-set alarm thresholds
then the system will alarm.
1.
Lower level fan speed setting
2.
Upper level fan speed setting
3.
Seed low level sensor
(Currently On)
4.
Fertiliser low level sensor
(Currently On)
5.
Navigation buttons
Figure 17 – Alarms sub menu screen
The seed low level alarm can be turned off by firstly using the navigation buttons located on
the left of the Artemis unit to select the level sensor option. Once selected, use the
navigation buttons on the right of the Artemis unit to turn the level sensor either on or off.
Setup Menu
Alarms Setup Button
