7. <F4> key EDIT PC NAME function
A.
Under MAIN MENU mode: hit <F4> key to enter the edit PC name operation (shown as
Figure(9)), on the Line 1 of Figure(9) show PC : 2 indicating the current screen
Information is from the second PC.
PC:2
PORT NAME EDIT
STU
───────────────────────
1 PC1-1111
2 PC2-2222
+
3 SLAVER-3
+
8
4 PC4-4
5 PC5-5555
+
6 PC6
7 SLAVER-7
+
8
8 PC8
PRESS ESC TO MAIN MENU
Figure(9)
+ : PC is POWER ON;
+ 8: PC is daisy-chained to 8 port model series which have MASTER / SLAVE
Configuration.
C. use <
↓
> or <
↑
> key to move the cursor
☞
(CURSOR), hit <ENTER> to enter the edit PC
name operation (shown as Figure(10)).
D. In Figure(10) the cursor
☞
indicates to edit the name of PC2. the cursor becomes the
icon
■
prompt to indicate the location you are editing. Input at most 16 characters
(<A~Z>, numerical <0~9> and <-> etc) and press <ENTER> as confirmation.
E. Edit SLAVE PC name: use <
↓
>, <
↑
>, <Page Up>, <Page Down> to select the PC of
SLAVE. Then press <
→
> to select the daisy-chained SLAVE PC, the OSD screen shows
as Figure (11): the right side of Line 1 shows “SLAVER:3” indicating the current screen
Display is from ?? SLAVE.
B. Under OSD mode: on the right side of (STU) field show the status of PC:
18
1u Claxan KVM-Switch Rack
Summary of Contents for CL-KVM-MPC1700S2-EN
Page 35: ......