E. Select 1 means to EDIT UNIT PSW. : Editing MASTER password, OSD will show as
Figure(15), user should type 1-8 characters (valid characters are <A-Z>, <0-9> and <->)
as the new password of MASTER and then press <ENTER> as confirmation. User should
Keep the new password firmly in mind.
NEW PSW.:?
Figure(15)
F. Select 2 to EDIT PC PORT PSW. : OSD will show as Figure(15). User can use <↓> or <↑>
to move
☞
(CURSOR) and press <ENTER> to select PC. The procedure of PC password
Edition is same as step 6.
10. Enable Password:
A. If selected PC has setup the password. OSD will ask for entering the password of the PC,
(Shown as Figure (16)). Correct password is required to use the selected PC.
PC PASSWORD:?
PC:12+5
- PC12345
Figure(16)
B. When user enter the wrong password, the OSD will show message “ ERROR” (Shown as
Figure(17)). User will be asked for re-entering the correct password.
ERROR
PC:12+5
- PC12345
Figure(17)
C. Under Figure (16) mode, user can hit HOT-KEY once to enter HOT-KEY MAIN MENU.
PC:2
PORT
PSW.
EDIT
STU
───────────────────────
1
PSW1
2
PSW2
+
3
PSW3
+
8
4
PSW-4
5
PSW-5555
+
6
PSW6
7
PSW7
+
8
8
PSW8
PRESS
ESC
TO
MAIN
MENU
Figure(18)
22
1u Claxan KVM-Switch Rack
Summary of Contents for CL-KVM-MPC1700S2-EN
Page 35: ......