I.
FUNCTION
1. This operation manual is adapted to Auto Multi-PCs Controller which are available with OSD
(ON SCREEN DISPLAY) support. This series of model can be connected as a first level of a
MASTER unit in cascade configuration.
2. When multi models are cascaded, the one which has a mouse, a keyboard and a monitor
connected to its Console port directly and operated by a user called “MASTER”; other
cascaded models are called “SLAVE”. The console side of each SLAVE has to be connected
to the PC side of MASTER.
3. For these models with built-in OSD (ON SCREEN DISPLAY) control, user can easily be
aware of the system status and operations through on screen menu.
4. These series of models can set up individual PC name and search the PC by name.
5. Password setup and management are available. If the password is built, you must input the
correct password to access the target PC.
6. AUTO SCAN function is available, Scan time interval is adjustable.
II. OPERATION
1. Front Panel Push Buttons
A. Selecting the PC by pressing the front panel push button directly.
B. The Auto Scan button of SLAVE will be disable when in cascade configuration.
2. Hot-key Commands
A. HOT-KEY can be set as <SCROLL > key (original design) or <L-CTRL> (LEFT CTRL)
Key.
B. Press HOT-KEY twice (Within 3 seconds) (Remark: Press HOT-KEY only one time when
password is accepted), then into the HOT-KEY MAIN MENU mode.
C. When on MAIN MENU screen, the OSD display is shown as Figure(1):
PC:3+7
MAIN
MENU
───────────────────────
F1
AUTO.
SCAN
MODE
F2
SELECT
PC
F3
SEARCH
PC
NAME
F4
EDIT
PC
NAME
F5
MORE
SYSTEM
F6
EDIT
UNIT/PC
PSW.
F7
OSD
POSITION
F8
HELP
PRESS
ESC
TO
EXIT
The currently in Use PC
is connected to the Port 7
of SLAVE and this SLAVE
is cascaded to the MASTER
Figure(1)
14
SECTION 3 KVM Control and OSD function
1u Claxan KVM-Switch Rack
Summary of Contents for CL-KVM-MPC1700S2-EN
Page 35: ......