G. Under AUTO SCAN mode, hitting<←> key is to select the previous powered-on PC.
H. Exit Auto SCAN mode:
Press <ESC> key to exit the AUTO SCAN and return to the selected PC and also enter
into the MENU mode operation, and the MOUSE and KEYBOARD then work normally.
F. Under AUTO SCAN mode, hitting<→> key is to select the nest powered-on PC.
5. <F2> key SELECT PC function
A. Under MAIN MENU mode, hit <F2>key to enter the select PC function, the screen
displays as Figure(4).
B. Under the mode, use <↓> or <↑> key to move the cursor
☞
(CURSOR), use <ENTER> to
Confirm the PC selection.
C. Under OSD display: right side (STU) field shows the selected PC status:
+ :selected PC is POWER ON;
+ 8:selected PC is daisy-chained to 8 port model series which have
MASTER / SLAVE Configuration.
D. Line one shows PC: 3+7 which indicates that the selected PC is Port 7 of SLAVE and
This SLAVE is daisy-chained to MASTER port 3. (Figure(4))
PC:3+7
PORT SELECT
MENU STU
───────────────────────
1 PC1-1111
2 PC2-2222
+
3 SLAVER-3
+
8
4 PC4-4
5 PC5-5555
+
6 PC6
7 SLAVER-7
+
8
8 PC8
PRESS ESC TO MAIN MENU
PC POWER ON
PC side is
connected
to
SLAVE of 8port
PC POWER OFF
Figure(4)
E
.
If cursor
☞
selects the PC which is remarked with “
⊕
ò” means that the PC is daisy-
Chained to the SLAVE. Hit <ENTER> or <→> to enter into the cascaded SLAVE. OSD
shows the selected daisy-chained PC information (see Figure(5)). On the right side of
Line 1 of Figure(5) shows “SLAVER:??” to identity the on screen information is from??
Port of SALVER.
16
1u Claxan KVM-Switch Rack
Summary of Contents for CL-KVM-MPC1700S2-EN
Page 35: ......