4.Press<F1>key to activate the AUTO SCAN function
A. In MAIN MENU,hitting<F1>key is to indicate to enter into AUTO SCAN function ,OSD
Will display as Figure(3).
B. The port number which is connected to the MASTER should be input first and following
press <+> and then press the port number of the SLAVE which is connected to the
Selected PC.
C. Hit <ENTER> to confirm. You can access the selected PC immediately if it is powered on.
D. If the selected PC has not been powered on, OSD shows “DISABLE”.
E. If selected wrong PC number, OSD displays “ERROR”.
D. Line one shows PC:3+7 which indicates that the currently in use PC is connected to the
port 7 of SLAVE and this SLAVE is cascaded to the MASTER port 3.
E. Under this screen mode, user can press button<F1>, <F2>, <F3>, <F4>, <F5>, <F6> for
Activating its function and can also press number key (0-9) to select PC.
F. While activating the HOT-KEY commands, MOUSE will be disable temporarily,
KEYBOARD can only control the OSD screen but CANNOT control the selected PC
. G. Press <ESC> to exit the MAIN MENU screen and return to the PC operation, the
MOUSE and KEYBOARD can then work normally.
3. Using numerical key to select PC
A. Press the numerical key once and the screen sill show as Figure(2), then press 0-9 to
select PC.
B. The port number which is connected to the MASTER should be input first and following
press <+> and then press the port number of the SLAVE which is connected to the
Selected PC.
C. Hit <ENTER> to confirm. You can access the selected PC immediately if it is powered on.
D. If the selected PC has not been powered on, OSD shows “DISABLE”.
E. If selected wrong PC number, OSD displays “ERROR”.
SELECT PC:?
Figure(2)
Table(1)
Sec. NUM LOCK
CAPS LOCK
SCROLL LOCK
5
OFF
OFF
ON
10
ON
OFF
OFF
15
ON
OFF
ON
20
OFF
ON
OFF
25
OFF
ON
ON
30
ON
ON
OFF
15
AUTO SCAN
PC: 3+9 12345678
PC NAME
PC of SLAVE
PC of MASTR
Figure(3)
1u Claxan KVM-Switch Rack
Summary of Contents for CL-KVM-MPC1700S2-EN
Page 35: ......