6
PARTS NEEDED
TOOLS NEEDED
CLASSICACCESSORIES.COM
NONE
While grasping both ends of the assembled front hoop, lift and insert into
the ends of the front poles into the two front holes in the X braces [F].
To attach the front hoop, grasp the front hoop pole [H] assembly (the shorter
of the two pole sets) by the outside set of side poles and bend into a curve.
ASSEMBLE AND INSTALL FRONT HOOP (FIG. 1-3)
Note: It may help to place the parts flat on the ground for easier assembly.
WARNING:
Use care when assembling the front and back hoop poles. Poles under tension can slip out of the metal/
plastic sleeves causing serious injury. Safety goggles are recommended.
STEP 2
1
2
3
To assemble the front hoop connect the three front hoop rods [H] together with attached PVC tubes,
so the completed pole has a metal tip on both ends.
H
Front Hoop
+
H
H
H
F
F
