11
PARTS NEEDED
TOOLS NEEDED
DELUXE ARCHED SNOW THROWER CAB
12
OR
OR
1/2 in. Socket
Wrench
Adjustable
Wrench
1
Be sure to tighten both the lower mounting posts [M], [N]
and the upper mounting posts [K], [L] after positioning. To
properly support the cab be sure to tighten the lower mounting
bolts evenly on each side of the mounting post plates.
ADJUSTING SNOW THROWER CAB ANGLE (FIG. 1-3)
CAUTION: No part of the fabric cab skin should touch the engine or exhaust system of your snow thrower.
STEP 5
Pull front corners of the fabric shell over the front corners of the cab frame.
Adjust cab to proper angle so that the mounting
bar ends [D] are parallel to the ground.
3a
3b
Inner view of of fabric shell with front corner secured.
2
