8
CLASSICACCESSORIES.COM
FINISH INSTALLING THE CAB FABRIC SHELL ONTO THE FRAME (FIG. 1-5)
Arrange the shell over the
frame then adjust it until it's
centered on the frame.
Repeat with the opposite
side, making sure the frame is
secured in the elastic pockets.
Secure shell using the three
rip and grip strips above
the front window panel.
Attach the two, side rip and grip
strips to the frame base.
Make sure to correctly attach the
rip-and-grip straps to the frame.
STEP 2 continued...
Grasp the back bottom corner of
the fabric shell and pull the elastic
over the end of the rear bar.
1
2
3
5
1
2
3
4
5
Rip and grip strip location.
Note: Do not attach front two
corners of the shell. This is
done after cab is installed
onto your snow thrower.
1
2
4
3
5
