PE 6001
DOUBLE SCISSOR LIFT 3T
PE 4002
4 COLUMNS POST LIFT 5T AUXILIARY LIFT 3.5T
30
washing cars
lifting personnel
crushing purpose
lifting vehicles whose weight exceed the maximum weight allowed by the producer.
The lift has to be installed on a concrete or cement floor.
Under the control box there are located the oil tank, the hydraulic pump, the oil valve and some
other control systems device.
The electrical system is in the line of the control box.
Frame:
Control unit:
Scissor lift is designed and built to lift all kinds of vehicles, all other use are unauthorized.
In particular, the lift is not suitable for:
DESCRIPTION OF THE LIFT
How to use:
The crane is designed to lift any type of vehicle with a load capacity of less than 5000kg (and
3500kg for auxiliary lifting), and can be used for testing, servicing and maintenance of vehicles. It
is suitable for recessed or floor installation, without the need for special structures.
Structure features:
• Scissor structure, equipped with construction and ground anchor holes.
• The structure is designed to take up as little space as possible.
• Independent low voltage control unit with excellent safety level.
• Hydraulic power factor correction
• Equipped with hydraulic safety.
• Equipped with safety valve and anti-breakage system in case of overload or failure of hydraulic
system, so that if the oil pump breaks, the platforms of the elevator would not lower suddenly.
• Equipped with manual pump platform lowering system for power failure situations.
Equipment :
• machine frame
• frame of the lift
• control unit
• hydraulic system
