AC 8000
AUTOMATIC AIR CONDITIONING STATION R1234yf
AC 8134
AUTOMATIC AIR CONDITIONING STATION R134a
36
Press
ENTER
again to print the report
by pressing
EXIT
, the cycle is fi nished
and the unit returns to the initial menu
B - To carry out each work step in MANUAL mode
(manual setting of work parameters) :
Select the
MANUAL / AUTOMATIC CYCLE
PARAMETER SETTING
mode (drawing on
the right) and access the following menu.
NOTE :
By selecting
START
and pressing
ENTER
, the unit performs all cycles
according to the displayed parameters.
To perform each step, select the work step by means
of the
UP and DOWN
arrows, press
ENTER
and modify the parameters (if necessary) by means
of the
DOWN/UP
buttons.
RECOVERY:
immediate start of gas recovery
from the vehicle only (recovery followed
by oil change). Press
ENTER
to start the
recovery cycle only.
NOTE:
After refrigerant recovery, the unit
displays the oil change step. Always allow the
oil change step to fi nish.
Oil recovery
Recovery
Vaccum