1
1
1
1
1
1
5. Press briefly on the button you want to
program on the universal remote control,
for example
[ 1 ]
for channel 1.
If no button has been chosen within 8
seconds, the LED light flashes quickly 6
times and the programming is cancelled.
6. Press briefly on the corresponding button
on the original remote control (in this
example, Channel 1). The LED light
flashes and then returns to a steady light.
If the receiving remote control does not
want to receive the code, press the button
on the original remote control a little bit
longer.
7. Repeat steps -6.
8. Press the button for desired device (the
same as in step 1). The LED light is
turned off and the remote control is ready
to use.
Observe!
On some VCRs and DVD players
the buttons up and down, left, right and ok
can be used for play, stop, fwd, rew and rec.
Tip!
By using the SHIFT button when recor-
ding, access to another pages with button
functions is given. During recording, press
[ SHIFT ]
once to activate the 4th page.
Press
[ PAGE ]
to switch to the th and the
6th page. Press
[ SHIFT ]
again to leave the
“SHIFT mode.”
Important!
- The function buttons (TV/DVD/SAT/VCR)
and the SHIFT button are not program-
mable.
- Every button can only fill one function.
Recording a new function automatically
annuls the previous function.
- If you pressed the wrong button in step 6
above, you have to wait 16 seconds for
the remote control to return to the normal
mode. Thereafter, you may redo the
programming from the beginning.
E
N
G
LI
S
H
